Index of /jeffl/Novatel/PCNT4DOS
Name Last modified Size Description
Parent Directory -
SETUP.BAT 1999-04-07 18:03 774
Ntgpsdrv.sys 1996-09-23 17:21 25K
Gpsinst.exe 1996-07-05 15:33 25K
GPSQUERY.EXE 1996-07-05 15:36 21K
GPSLOAD.EXE 1996-09-11 15:23 49K
GPSCON.EXE 1996-07-05 15:28 50K
******************************************************************************
NOVATEL GPSCARD NT PROGRAMS
******************************************************************************
Company: GPS Products.
(c) NovAtel Inc.
6732 - 8th Street N.E.
Calgary, Alberta.
Canada. T2E 8M4
COPYRIGHT NovAtel Inc, all rights reserved.
No part of this software may be reproduced or modified in any
form or by any means - electronic, mechanical, photocopying,
recording, or otherwise - without the prior written consent of
NovAtel Inc. and author(s).
IN NO EVENT WILL NOVATEL BE LIABLE FOR ANY INDIRECT,INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES WHETHER THROUGH TORT, CONTRACT
OR OTHERWISE. THIS SOFTWARE IS SUPPLIED ON AN 'AS IS' BASIS.
LIMITED TECHNICAL SUPPORT IS AVAILABLE FOR THESE PRODUCTS.
******************************************************************************
CONTENTS:
Installation Utilities
GPSINST.EXE 25 KB
GPSQUERY.EXE 21 KB
DOS Shell Utilities
GPSLOAD.EXE 49 KB
GPSCON.EXE 50 KB
******************************************************************************
INSTALLATION INSTRUCTIONS:
1. GPSINST must be installed prior to running any of the DOS Shell
Windows NT utilities. The command line instructions for
GPSINST are as follows:
C:\>gpsinst
******************************************************************************
* NT GPS Install Program V1.1
*
* Usage: gpsinst /D<Driver> [/N<Instance>] [/I<Interrupt>] [/A<Address>]
* or
* gpsinst /R [/NInstance]
*
* Where: <Driver> - full path and name of the NT GPS Driver
* <Instance> - name of the instance of this driver (Default = GPS1)
* <Interrupt> - interrupt set for the card (3,5, or 7) (Default = 5)
* <Address> - IO address for card (150, 200, or 300) (Default = 150)
* /R - means to remove the driver
*
* Ex: gpsinst /Dc:\winnt\sytem32\ntgpsdrv.sys /NGPS1 /I5 /A150
******************************************************************************
2. GPSLOAD and GPSCON funtions very similar to the standard DOS programs
provided with your GPSCard. See your PC Installation Guide for
additonal information. The command line description is as follows
where <Instance> refers to the instance installed with GPSINST.
C:\>gpsload
******************************************************************************
* NT GPS Load Program V1.3
* Usage: gpsload [/N<Instance>] [/C] [/A<Ascii File>] [/B<Binary File>]
* [/C<Console File>] [/F<Init File>] <.btl file>
*
* Where: <Instance> - name of the driver instance (Default = GPS1)
* <Ascii File> - file name to place ascii records in.
* <Binary File> - file name to place binary records in.
* <Console File> - file name to place console records in
* (Note: console records always go to screen as well)
* <Init File> - file name that will be downloaded to the card for
* initialization.
* <.btl file> - full path to the GPSCard .btl file for your GPSCard.
* (ex. c:\gps\card\main.btl)
* /C - runs the console after loading card
*
* Ex: gpsload /NGPS2 c:\gps\card\main.btl
* Ex: gpsload /NGPS2 /C c:\gps\card\main.btl
******************************************************************************
C:\>gpscon
*****************************************************************************
* NT GPS Console Program V1.4 - Press ESC to exit!
*
* Usage: gpscon [/N<Instance>] [/A<Ascii File>] [/B<Binary File>]
* [/C<Console File>] [/F<Init File>] [/R] [/K]
*
* Where: <Instance> - name of the driver instance. (Default = GPS1)
* <Ascii File> - file name to place ascii records in.
* <Binary File> - file name to place binary records in.
* <Console File> - file name to place console records in.
* (Note: console records always go to screen as well)
* <Init File> - file name that will be downloaded to the
* card for initialization.
* /R - resets the card
*
* Ex: gpscon /NGPS2 /Adata.asc /Bdata.bin /Finit.dat
******************************************************************************