.NET FRAMEWORK SETUP VERIFICATION TOOL USER'S GUIDE The latest version of this user's guide can be found at http://blogs.msdn.com/astebner/pages/8999004.aspx. ----------------------------- INTRODUCTION ----------------------------- This .NET Framework setup verification tool is designed to automatically perform a set of steps to verify the installation state of one or more versions of the .NET Framework on a computer. It will verify the presence of files, directories, registry keys and values for the .NET Framework. It will also verify that simple applications that use the .NET Framework can be run correctly. ----------------------------- DOWNLOAD LOCATIONS ----------------------------- The .NET Framework setup verification tool is available for download at the following locations: http://cid-27e6a35d1a492af7.skydrive.live.com/self.aspx/Blog%7C_Tools/netfx%7C_setupverifier%7C_new.zip http://blogs.msdn.com/astebner/attachment/8999004.ashx The .zip file that contains the tool also contains a file named history.txt that lists when the most recent version of the tool was published and what changes have been made to the tool over time. ----------------------------- SUPPORTED PRODUCTS ----------------------------- The .NET Framework setup verification tool supports verifying the following products: .NET Framework 1.0 .NET Framework 1.1 .NET Framework 1.1 SP1 .NET Framework 2.0 .NET Framework 2.0 SP1 .NET Framework 2.0 SP2 .NET Framework 3.0 .NET Framework 3.0 SP1 .NET Framework 3.0 SP2 .NET Framework 3.5 .NET Framework 3.5 SP1 .NET Framework 4 Client .NET Framework 4 Full .NET Framework 4.5 By default, the .NET Framework setup verification tool will only list versions of the .NET Framework that it detects are installed on the computer that it is being run on. As a result, the tool will not list all of the above versions of the .NET Framework. This product filtering can be overridden by running the .NET Framework setup verification tool with the following command line switch: netfx_setupverifier.exe /q:a /c:"setupverifier.exe /a" ----------------------------- SILENT MODE ----------------------------- The .NET Framework setup verification tool supports running in silent mode. In this mode, the tool will run without showing any UI, and the user must pass in a version of the .NET Framework to verify as a command line parameter. To run in silent mode, you need to download the verification tool .zip file, extract the file netfx_setupverifier.exe from the .zip file, and then run it using syntax like the following: netfx_setupverifier.exe /q:a /c:"setupverifier.exe /p " The value that you pass with the /p switch to replace in this example must exactly match one of the products listed in the Supported products section above. For example, if you would like to run the tool in silent mode and verify the install state of the .NET Framework 2.0, you would use a command line like the following: netfx_setupverifier.exe /q:a /c:"setupverifier.exe /p .NET Framework 2.0" ----------------------------- EXIT CODES ----------------------------- The verification tool can returns the following exit codes: 0 - verification completed successfully for the specified product 1 - the required file setupverifier.ini was not found in the same path as setupverifier.exe 2 - a product name was passed in that cannot be verified because it does not support installing on the OS that the tool is running on 3 - a product name was passed in that does not exist in setupverifier.ini 100 - verification failed for the specified product 1602 - verification was canceled ----------------------------- LOG FILES ----------------------------- This verification tool creates 2 log files by default that can be used to determine what actions the tool is taking and what errors it encounters while verifying a product. The 2 log files are listed below, and they are created in the %temp% directory by default. Note that you can find the %temp% directory by clicking on the Windows start menu, choosing Run, typing %temp% and clicking OK to open the directory in Windows Explorer. %temp%\setupverifier_main_*.txt - this log contains information about all actions taken during a verification tool session; it will include information about each resource that the tool attempts to verify for a chosen product and whether or not that resource was found on the system; this log tends to be fairly long, so errors will be logged with the prefix ****ERROR**** to make it easy to search and find them %temp%\setupverifier_errors_*.txt - this log only contains information about any errors found during verification of a chosen product A new pair of log files will be created each time the verification tool is launched. The date and time the tool is launched will be appended to the end of the log file names by default in place of the * in the names listed above. If you want to control the exact names used for the log files, you can use the following command line parameters: /l - specifies a name to replace the default value of setupverifier_main_*.txt for the main activity log for the verification tool /e - specifies a name to replace the default value of setupverifier_errors_*.txt for the error log for the verification tool For example, the following command line will allow you to specify non-default names for both log files: netfx_setupverifier.exe /q:a /c:"setupverifier.exe /l %temp%\my_main_log.txt /e %temp%\my_error_log.txt"